Return Instructions
2005 Summit Safety Harness (OBRC2) (5N887) (5J639)

1. Locate the warning label shown below, which is attached to the free end of the main tether strap.
2. Locate the indicated origin of manufacture location (figure 1). If the label contains the words "Made in China," check the box labeled "YES," otherwise check "NO."
3. Locate the indicated Year of Manufacture location (figure 2). If the label indicates it was manufactured in the year 2005, check the box labeled "YES," otherwise check "NO."
4. If BOTH "YES" boxes were checked, this harness is subject to recall. Please follow the mailing instructions below. If EITHER box was checked "NO," this harness is NOT subject to recall.
5. If both "YES" boxes were checked, DO NOT USE THIS HARNESS. A replacement will be provided at no cost to you.

Made in China?
 YES
 NO

Manufactured in 2005?
 YES
 NO

Special Note: This recall DOES NOT affect any harness manufactured with multi-color camouflage webbing. Any treestands purchased before June 20, 2005 are not affected by this recall. This recall DOES NOT affect any harness manufactured in Taiwan.

Please include a copy of this page with the product when you make your return.

Mailing Instructions:

Please cut out the main tether strap below the warning label and just above the cross strap as described in figure 3 below. The warning label must remain attached to cut piece. If you have your own packaging and wish to return the cut portion of the strap by mail, please print and fill out the address form above and enclose it with the cut strap when you make your return. We will refund your postage cost.

For any assistance in making the return please call a specialist in our Customer Service department at 800-555-9717. We can arrange for a FedEx pickup of the cut strap, send you packaging for shipping, and/or send you an address label that will pay for postage.

Please print, complete and enclose this form with the cut portion of the Summit Safety Harness strap when you return it to L.L.Bean. You may also simply write this information on a sheet of paper you enclose with the strap; for the efficient processing of your return, please write "2005 Summit Safety Harness" at the top of the sheet.

Please send cut strap to:

L.L.BEAN RETURNS
2005 SUMMIT SAFETY HARNESS
3 CAMPUS DRIVE
FREEPORT, ME 04034

Again, please remember to include a copy of the completed form above with the cut strap. If you need any other assistance in making the return, please call 800-555-9717.